background image

INDUSTRIAL SLABS

BEIGE

Sizes

-
 
Code Size Thickness Surfaces DIN51130 DIN51097
B63162 60X30 - 12"X24" 9 mm Flamed A strikingly attractive rough surface, particularly suitable for use on floors where high slip resistance is required. R11 A+B+C
P63162 60X30 - 12"X24" 9 mm Matt R10 A+B
P66162 60X60 - 24"X24" 9 mm Matt R10 A+B
L63162 60X30 - 12"X24" 9 mm Satin-finished R9
L66162 60X60 - 24"X24" 9 mm Satin-finished R9
P40162 40X40 - 16"X16" 9 mm Matt R10 A+B
L40162 40X40 - 16"X16" 9 mm Satin-finished R9
B40162 40X40 - 16"X16" 9 mm Structured Strongly textured surface resembling the structure of cloven stone. R11 A+B+C
 
Code Size Surfaces
P30815 30X30 - 12"X12" Matt
L30871 30X30 - 12"X12" Satin-finished

Trims

+
 
  Flamed Matt Satin-finished Structured
60X9 -P69162 | 9 mm--
40X9 -P49162 | 9 mm--
30X8 -P38162 | 9 mm--
 
 PHYSICAL-CHEMICAL PROPERTIESSTANDARD OF TESTREQUIRED VALUEFMG AVERAGE VALUE
SIZES ISO 10545.2 Length and width ±0,6%
Thickness ±5%
Linearity ±0,5%
Wedging ±0,6%
Warpage ±0,5% 
±0,2%
±2%
±0,2%
±0,2%
±0,2%
WATER ABSORPTION ISO 10545.3 ≤0,5% 0,04% (*)
FLEXION RESISTANCE ISO 10545.4 Modulus ≥35 N/mm²
Breaking strength ≥1300N 
55 N/mm²
561 Kg / cm²
2500 N
DEEP ABRASION RESISTANCE ISO 10545.6 Volume ≤175 mm³ 120 mm³
(as tested by Smith Emery laboratory)
FROST RESISTANCE ISO 10545.12 Must not produce noticeable alteration to surface. Frost-proof
COEFFICIENT OF LINEAR THERMAL-EXPANSION ISO 10545.8 ≤9x10‾6 °C‾¹ ≤6,5x10‾6 °C‾¹
COLOR RESISTANCE TO LIGHT DIN 51094 Must not produce noticeable colour variation. No change in brightness or colour of samples.
CHEMICAL RESISTANCE ISO 10545.13 Must not produce noticeable signs of chemical attack. Not attacked
STAIN RESISTANCE ISO 10545.14 1 ‹ X ‹ 5  stains removed by hot running water (without detergent)(**)
FRICTION COEFFICIENT (SLIPPERINESS) BCRA REP
CEC 6/81
Satisfactory friction 0,42 - 0,75 (*) 
FRICTION COEFFICIENT (SLIPPERINESS) DIN 51130 Test method available It can vary according to the surface finish

(*) = The products having an absorption <0,5 are classified according to the UNI CEN standards "fully vitrified tiles" and according to the ASTM standards "impervious tiles"
(**) = It can vary according to the surface finish

TEST ASTM | American Standards

WATER ABSORPTION ASTM C-373 Tile shall be impervious < 0,05%
SIZE ASTM C-499 Average Facial Dimension    <1,5%
Wedging     ±1%
Warpage     ±1% of any edge
Range of tickness (inch.)     < 0,04
0,15%
0,33%
0,17%
0,014%
DEEP ABRASION RESISTANCE ASTM C-501 ≥100 217
FROST RESISTANCE ASTM C-1026 No sample must show alterations to surface Resistant
CHEMICAL RESISTANCE ASTM C-650 To 10% HCL Acid - No sample must show visible signs of chemical attack to 10% KOH Alkali Unaffected
ASTM C-648 250 PSI or greater Exceeds standards > 460 PSI
SKID RESISTANCE
(AVERAGE COEFFICIENT OF FRICTION)
ASTM C-1028 - Meets or exceeds requirements (Please ask for individual test reports)
COLOR RESISTANCE TO THE LIGHT DIN 51091 No noticeable color variation No change in brightness or color of samples
(*) = as tested by Smith Emery laboratory

CE marks | Enter product code



TEST ASTM | Pdf Download

Where we are

FMG
Via Ghiarola Nuova, 119
Fiorano Modenese (MO) Italy

Ph. +39 0536 862111
Fax +39 0536 804602

Ask for information



Company Info & Privacy RSS | SITE MAP GRANITI | MARMI | PIETRE | TRAVERTINI | |

© 2013 Divisione FMG Fabbrica Marmi e Graniti™ P.IVA. 01411010356